The answer is no, off grid solar power plant require batteries to store electricity. If the grid power isn't available and batteries are out of equation too.
[pdf] 4 Steps to Properly Ground Your Solar InverterStep 1: Run a Properly Sized Grounding Electrode Conductor The grounding conductor between the inverter and the grounding electrode system should be #6 AWG or larger bare copper wire. . Step 2: Connect to Grounding Electrodes . Step 3: Establish Continuity . Step 4: Label All Connections .
[pdf] First, turn on the battery switch, second turn on the battery switch of the single phase inverter, third turn on the solar panel switch, fourth， turn on the output, and finally turn on the load;
[pdf] All power inverters have an automatic shut off function which prevents the attached battery bank from being overly discharged. When the voltage of the batteries falls to a certain fixed level, the inverter simpl. .
The relay pictured in this article is available from Rapid, for around £6, or a wide selection of similar relays are available from a. .
One problem with many power inverters is that the automatic switch off voltage is too low – for example 10.5V or 11V. By the time the battery or battery bank gets down to this sort of level of charge, it is pretty much empty and theref. .
DISCLAIMER – mains electricity can KILL. We recommend that you talk to a qualifiedelectrician before attempting to implement any of the ideas discussed in this article.
[pdf] You'll generally need an inverter that's 75% as big as your solar panel system's kilowatt-peak (kWp), which is how much solar energy it produces at standard test conditions.
[pdf] Disconnect the AC and DC switchesInspect your system to check if it has a disconnect switch. If not, place a reflecting or opaque surface over the solar panels.Verify that the voltage is zero by using a voltmeter or multimeter.Unplug the wires. This is simple using MC4 connectors, or you may use a socket wrench.If necessary, take out the bolts and clamping mechanisms.
[pdf] 
